Table of Contents
Advertisement
3. In the <Address> pane, provide the
necessary information.
MAC (Ethernet) Address : The MAC
address imprinted on the network
device label is automatically displayed
and requires no user setting.
M
IP related parameters can be set only
when DHCP is not checked.
If using a broadband router
IP Address : Enter an address falling in
the IP range provided by the Broadband
router.
ex) 192.168.1.2~254,
192.168.0.2~254,
192.168.XXX.2~254
Subnet Mask : The <Subnet Mask>
of the Broadband router will be the
<Subnet Mask> of the network video
encoder.
Gateway : The <Local IP Address> of
the Broadband router will be the <Gateway> of the network video encoder.
M
The settings may differ depending on the connected Broadband router model.
For more information, refer to the user manual of the applicable router.
For more information about port forwarding of the broadband router, refer to "Port Range
Forward (Port Mapping) Setup". (Page 30)
If not using a broadband router
For setting <IP Address>, <Subnet Mask>, and <Gateway>, contact your network administrator.
4. In the <Port> pane, provide necessary
information.
HTTP Port : Used to access the
network device using the Internet
browser, defaulted to 80.
VNP Port : Used to control the video
signal transfer, defaulted to 4520.
5. Enter the password.
Enter the password of "admin" account, which was used to access the network
device.
English _27
Hide quick links:
Advertisement
Table of Contents
