Feature Guide References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.
Type the new extension number, then click Apply.
2.
Set the status of the extension port to "OUS", then "INS".
When changing the extension number, make sure that the extension port is not in use. If the extension number
is changed while the port is in use, the new extension number will not come into effect.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
3.6 [1-1] Slot—Port Property - Extension Port—Connection Command
Feature Guide References
None
Extension Name
Specifies the name of the extension.
Value Range
Max. 20 characters
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
None
FWD Set for Call from CO
Indicates the current FWD status for incoming trunk calls (reference only).
6.1 [4-1-1] Wired Extension—Extension Settings
PC Programming Manual
613