2-6-2] Numbering Plan-Quick Dial - Panasonic KX-TDA100 Programming Manual

Hybrid ip-pbx, pc programming manual

Hide thumbs Also See for KX-TDA100:

Table of Contents

4.9 [2-6-2] Numbering Plan—Quick Dial

Quick Dialling numbers are used to call extensions or outside parties, or access certain features without having

to dial their full numbers. It is possible to register Quick Dialling numbers that overlap with other registered

numbers (refer to "Automatic Rerouting of Calls via a Private IP Network to Public Trunks" in the Feature

A maximum of 80 Quick Dialling numbers can be programmed. When an EMEC/MEC card is installed in the

PBX, a maximum of 4000 (with the KX-TDA100/KX-TDA200/KX-TDA600) or 1000 (with the KX-TDA30) Quick

Dialling numbers can be programmed. To display other sets of numbers, click the applicable tab.

For more information on flexible numbering, see "2.3.6 Flexible Numbering/Fixed Numbering" in the Feature

Use quick dial for rerouting to public CO when TIE line does not work

Specifies whether to check if the quick dial numbering plan is compatible (does not overlap) with the main

numbering plan.

Disable: Checks whether the quick dial numbering plan is compatible with the main numbering plan.

Enable: Does not check whether the quick dial numbering plan is compatible with the main numbering plan.

Maintenance Console Location

4.9 [2-6-2] Numbering Plan—Quick Dial

Programming Manual References

Feature Guide References

1.6.1.6 Quick Dialling

1.30.2 Voice over Internet Protocol (VoIP) Network

2.3.6 Flexible Numbering/Fixed Numbering

Specifies the Quick Dialling number.

Basic Memory: Max. 4 digits (consisting of 0–9, *, and #)

MEC expansion memory: Max. 8 digits (consisting of 0–9, *, and #)

Maintenance Console Location

4.9 [2-6-2] Numbering Plan—Quick Dial

Programming Manual References

4.9 [2-6-2] Numbering Plan—Quick Dial

PC Programming Manual

Show Quick Links

Table of Contents

Kx-tda30 Kx-tda200 Kx-tda600