Table of Contents
Advertisement
10 Configure the alarm settings [Alarm]
IMPORTANT
•
Depending on the network line speed or the network traffic, images may not be transmitted at the exact
designated interval or period.
Alarm image
[FTP >>]
When "FTP >>" is clicked, the [FTP] tab of the "Server" page will be displayed. (section 12.2)
[Alarm image FTP transmission]
Select "On" or "Off" to determine whether or not to transmit the alarm image to the FTP server.
Default: Off
[Directory name]
Enter the directory name where the alarm images are to be saved.
For example, enter "/ALARM" to designate the directory "ALARM" under the root directory of the FTP server.
Available number of characters: 1 - 256 characters
Unavailable characters: " & ;
Default: None (blank)
[File name]
Enter the file name used for the alarm image to be transmitted to an FTP server. The file name will be as
follows.
File name: ["Entered file name" + "Time and date (year/ month/ day/ hour/ minute/ second)"] + "Serial number"
Available number of characters: 1 - 32 characters
Unavailable characters: " & * / : ; < > ? \ |
Default: None (blank)
[Post alarm]
Transmission interval
Select the transmission interval for the alarm image transmission to the FTP server from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
–
Default: 1fps
Number of images
Select the number of images to be transmitted from the following.
1pic/ 2pics/ 3pics/ 4pics/ 5pics/ 6pics/ 7pics/ 8pics/ 9pics/ 10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/
300pics/ 500pics/ 1000pics/ 2000pics/ 3000pics
–
Default: 100pics
Recording duration
Approximate time to be taken to save the set "Number of images" with the set "Transmission interval" will be
displayed.
40
Operating Instructions
Advertisement
Table of Contents
