Table of Contents
Advertisement
1 Monitor Images on a PC
G
[Image capture size] buttons
These buttons will be displayed only when a JPEG image is displayed.
[VGA]
[QVGA]
[D1]
H
[Image quality] buttons
These buttons will be displayed only when a JPEG image is displayed.
[1] button: Images in the main area will be displayed in accordance with the setting for "Quality1" of
"Image quality setting". (section 8.2)
[2] button: Images in the main area will be displayed in accordance with the setting for "Quality2" of
"Image quality setting". (section 8.2)
I
[Zoom] buttons
: Click this button to adjust the zoom ratio to the "Wide" side.
: Click this button to set the zoom ratio to x1.0.
: Click this button to adjust the zoom ratio to the "Tele" side.
J
[Focus] buttons
This feature is not supported on the Thermal Camera
K
[Auto mode]
This feature is not supported on the Thermal Camera
L
Control pad/buttons
Left-click on the control pad or buttons to adjust the horizontal/vertical position of the camera (panning/
tilting). Panning/tilting speed will be faster if a clicked point gets farther from the center point of the
control pad.
It is also possible to pan/tilt the camera by dragging the mouse.
Zoom and focus can be adjusted by right-clicking. When an upper/lower area of the control pad is right-
clicked, the displayed image will be zoomed in/out on. When a left/right area is right-clicked, the focus
will be adjusted to the Near/Far side.
Zoom can also be adjusted using the mouse wheel.
Note that the Thermal Camera does not support optical zoom or physical pan/tilt – the Pan/Tilt/Zoom
controls are digital only, within an existing image.
M
[Brightness] buttons
Left click on the "+" and "–" buttons to cycle through the different display options available:
Greyscale (White hot)
Greyscale (Black hot)
Ironbow
Left-click on the "Normal" button to return to the default value: Greyscale (White hot)
N
[Preset]
This feature is not supported on the Thermal Camera
O
Unit title
The title entered for "Unit title" on the [Basic] tab will be displayed. (section 7.1)
10
Operating Instructions
The characters "VGA" will turn green and images in the main area
will be displayed in VGA size.
The characters "QVGA" will turn green and images in the main area
will be displayed in QVGA size.
This option is not supported by the Thermal Camera
*2
*2
Advertisement
Table of Contents
