22
en | Optional Modules and Peripheral Devices
Continuous Flash: 1 sec
On, 1 sec Off
Turns Off momentarily
Continuous Flash: A 3-
pulse signal, followed by
a short delay at the end
of the 3rd pulse
Table 5.13: RFRC-OPT Radion Receiver System Status Indicator
2014.4 | 01 | F.01U.267.112
Receiver is being programmed with the zone and transmitter IDs
from the AMAX panel.
Receiver has obtained a valid transmission from a RADION
transmitter.
Communication error and / or a self-test failure.
Causes:
–
A communication failure between the AMAX panel and the
receiver or
–
An invalid address switch setting.
Installation Guide
AMAX panel 4000 / AMAX panel 4000
Bosch Sicherheitssysteme GmbH
EN