OfficeServ 7400
TECHNICAL MANUAL
The MAC address of WBS24 is
•
displayed.
The version information on WBS24 is
•
displayed.
The status information on WBS24 is
•
displayed.
Select the RF Channel of WBS24.
•
Select the transmit power of WBS24.
•
6.
Set the following items in the SIP menu:
Set RETRANS T1 to be used in SIP.
•
Set RETRANS T2 to be used in SIP.
•
Set RETRANS T4 to be used in SIP.
•
Set GEN LINGER TM to be used in SIP.
•
Set INV LINGER TM to be used in SIP.
•
Set GEN NO RESP to be used in SIP.
•
Set INV NO RESP to be used in SIP.
•
Set REQ RETRY to be used in SIP.
•
Set PROVISIONAL TIME to be used in
•
SIP.
MMC: 845-COMBO
CWBS01: MAC ADDR
0000 0000 0000
CWBS01:VERSION
CWBS01:STATUS
OFF
CWBS01: RF CHAN
USE CH 1 : 11
CWBS01: TX POWER
DEFAULT
SIP : RE-TRANS T1
000500 MS
SIP : RE-TRANS T2
004000 MS
SIP : RE-TRANS T4
05000 MS
SIP : GEN LING TM
00600 MS
SIP : INV LING TM
001000 MS
SIP : GEN NO RESP
005000 MS
SIP : INV NO RESP
006000 MS
SIP : REQ RETRY
005000 MS
SIP : PROVISIONAL
180000MS
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006