1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Telephone System
  5. OfficeServ 7400
  6. Technical manual

Samsung OfficeServ 7400 Technical Manual page 220

Hide thumbs Also See for OfficeServ 7400:
Table of Contents

Advertisement

OfficeServ 7400
TECHNICAL MANUAL
placing the bulk of the incoming calls to a selected individual, with other
members only getting the calls when the first member is busy. The number
of members allowed for a sequential group is 48.
2. DISTRIBUTED: The first call will go to the first member, the second call will
go to the second member, the third call will go to the third member. This type
of group is useful for evenly distributing the call among all group members.
The number of members allowed for a distributed group is 99.
3. UNCONDITIONAL: Calls are placed to all group members simultaneously.
This reduces the number of members of the groups to 32. If a group member
is busy, they can receive off hook ring if defined in MMC 300. This ring mode
option is not available for VMSUCD or VMAA groups.
C. OVERFLOW: This is the timer value that will cause unanswered calls to a group
to begin also ringing the NEXT PORT (see below) after this timer has elapsed. If
set to 000, no overflow will take place.
D. NEXT PORT: This is the station or group number that callers will also ring at if
the OVERFLOW feature has been programmed. The OVERFLOW DESTINATION
can be defined as:
1. COMMON BELL There are 3 relays available in the OfficeServ 7400 system
that are defined as Common Bell.
2. RING OVER PAGE This is defined by using the number of a page audio
output.
3. STATION OR STATION GROUP. Any station or station group can be
defined as the NEXT port.
E. GRP TRANSFER: This is a timer that will determine how long C.O. calls
transferred to the group will ring at the group before recalling. If set to 000, no
recall will take place.
F. MEMBER: List all members that are to be in the group. Up to 48 members are
allowed in each group, but stations can be assigned to multiple station groups.
G. NXT HUNT: The length of time a call will ring at a station before it hunts to the
next group member.
H. GROUP BUSY: OFF When this option is set to ON an intercom caller will receive
a busy signal when calling the group and all members of the group are busy.
When this occurs then the overflow timer is bypassed as the group is not
ringing.
MMC: 601
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006
Show Quick Links

Hide quick links:

Advertisement

Table of Contents
loading

Related Manuals for Samsung OfficeServ 7400

Related Products for Samsung OfficeServ 7400

Table of Contents