Table of Contents
Advertisement
Issue 6
OPERATING
PROCEDURES
D - 64
Note: The programming mode is used to set function keys, LCD display mode (for
term
D
Cordless only), and off-hook ringing from the D
handset. When initially installed, function keys F1~F4 default to line keys 1~4
respectively, LCD display mode defaults to mode 1, and off-hook ringing
defaults to ON.
Note: Before function keys F1~F4 can be programmed, the
Terminal must be in the programming mode.
term
To program the D
1.
Press and hold down
2.
Press the chan key repeatedly to scroll through the line key (LK)
and feature options for function key F1.
3.
Press the vol key to select the displayed line key or feature.
4.
When a Line Key is assigned, press the chan key to turn Off-
Hook Ringing ON or OFF. The LCD indicates /TALK for ON or /
NO TALK for OFF.
5.
Press the vol key to advance to the next function key (F2 ~ F4).
6.
After programming F4, press the vol key to advance to Global
Off-Hook Ringing Assignment.
7.
Press chan to turn Global Off-Hook Ringing ON/OFF (LCD
indicates ON or OFF).
8.
Press the talk key to exit.
Function keys F1 ~ F4 can be programmed as Line Keys 1~16,
Redial (LNR/SPD), Answer (ANS), Feature (FNC), or Recall.
When assigned, these keys operate the same as on an NEC
Multiline Terminal.
When initially installed, function keys F1~F4 default to Line Keys
1~4 respectively and Off-Hook Ringing defaults to ON.
Global Off-Hook Ringing must be set to ON (default)
function key is to operate with Off-Hook Ringing.
To program the D
1.
Press and hold down the
TALK key to enter the programming mode.
2.
Press the R/VOL key repeatedly to select the required function
for the F1 key.
Cordless Lite:
and #, then press the talk key.
,
term
Cordless:
J
a nd
Electra Elite
term
Cordless Terminal
term
D
Cordless
when
L
keys, then press the
term
D
® Cordless Terminal
any
- Quick Links:
- Section 1 General Information
Hide quick links:
Advertisement
Table of Contents
