Table of Contents
Advertisement
8. Check the main switch.
Refer to "CHECKING THE
SWITCHES" on page 7-89.
OK ↓
9. Check the engine stop switch.
Refer to "CHECKING THE
SWITCHES" on page 7-89.
OK ↓
10.Check the neutral switch.
Refer to "CHECKING THE
SWITCHES" on page 7-89.
OK ↓
11.Check the sidestand switch.
Refer to "CHECKING THE
SWITCHES" on page 7-89.
OK ↓
12.Check the clutch switch.
Refer to "CHECKING THE
SWITCHES" on page 7-89.
OK ↓
13.Check the relay unit (starting circuit
cut-off relay).
Refer to "CHECKING THE
RELAYS" on page 7-96.
OK ↓
14.Check the relay unit (diode).
Refer to "CHECKING THE RELAY
UNIT (DIODE)" on page 7-98.
OK ↓
15.Check the lean angle cut-off switch.
Refer to "CHECKING THE LEAN
ANGLE CUT-OFF SWITCH" on
page 7-100.
OK ↓
16.Check the entire ignition system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 7-1.
OK ↓
Replace the ECU.
NG →
Replace the main switch/immobilizer unit.
NG →
Replace the right handlebar switch.
NG →
Replace the neutral switch.
NG →
Replace the sidestand switch.
NG →
Replace the clutch switch.
NG →
Replace the relay unit.
NG →
Replace the relay unit.
NG →
Replace the lean angle cut-off switch.
NG →
Properly connect or repair the ignition
system wiring.
7-4
IGNITION SYSTEM
Advertisement
Chapters
Table of Contents
Troubleshooting
