Areas Of The User Interface - D-Link DGS-6600 Series Hardware Installation Manual

Layer 3 chassis ethernet managed switch

Hide thumbs Also See for DGS-6600 Series:

Table of Contents

DGS-6600 Layer 3 Chassis Ethernet Managed Switch Hardware Installation Guide

Areas of the User Interface

Figure 5-2 shows the user interface. 6 areas divide the user interface and are described in the table 5-1.

Area

Green

Light Blue

Red

Yellow

Blue

Pink

Function

Presents a graphical near real-time image of the front panel of the module

selected (slots 1 to 4). This area displays the Module's LED activity, ports,

buttons and specific module features depending on the slot. Click the D-Link

logo to go to the D-Link Website. Select the Refresh Interval time from the drop

down menu on the right and then click the Apply button to set the interval when

the specific modules LED's will be updated in the graphical view.

To display the module in a different slot click on the drop-down menu to select

the chassis slot (slots 1-4) desired. The realtime front view of the new module

chosen should appear in the green area.

Select the folder or window to display. Open folders and click the hyperlinked

window buttons and subfolders contained within them to display windows.

This area provides a chassis view with the currently installed modules and

power supplies.

Displays the Switch parameter status based on user selection (in the red area)

and also provides configuration data fields and drop-down menus for

parameters that can be set.

Displays the system uptime in days, hours, minutes and seconds.

Displays the currently logged in Username and IP address of the user.

Provides a logout button. Click the Logout word to logout of the Web UI.

Table of Contents

Dgs-6604 Dgs-6608