Dgs-6600-8Xg Module - D-Link DGS-6600 Series Hardware Installation Manual
Layer 3 chassis ethernet managed switch
Hide thumbs
Also See for DGS-6600 Series:
- Quick installation manual (53 pages) ,
- Manual (972 pages) ,
- Cli reference manual (951 pages)
Table of Contents
Advertisement
DGS-6600 Layer 3 Chassis Ethernet Managed Switch Hardware Installation Guide
DGS-6600-8XG Module
The basic appearance of the DGS-6600-8XG module is shown in Figure 1-13. The DGS-6600-8XG is a line card
module of the DGS-6604, which provides 8x 10 Gigabit Ethernet XFP module ports.
Interface
The DGS-6600-8XG features 8x 10 Gigabit Ethernet XFP module ports.
LEDs
The DGS-6600-8XG uses different colored LEDs to indicate different systems status, as described in table Table
1-19.
LED
Color and Status
Indicator
Power
Solid Green
Off
System
Solid Green
Solid Red
Blinking Green
Off
Link/Act/
Solid Green
Speed Mode
Blinking Green
Off
Figure 1-13 Basic Appearance of DGS-6600-8XG
This LED will light solid green when the Switch is powered on.
This LED will remain off when the Switch is powered off.
This LED will light solid green when the Switch is operating
normally.
This LED will light solid red when the Switch has failed.
This LED will blink green while the Switch is booting up or
shutting down.
This LED will remain off when the Switch is shut down.
This LED will light solid green when there is a secure
connection (or link) to a device that is operating at 10000Mbps.
This LED will blink green when there is activity occurring on a
port that is operating at 10000Mbps.
This LED will remain off when there is no link on the port.
Table 1-19 DSGS-6600-8XG LED Behavior
Description
31
Advertisement
Table of Contents
Troubleshooting
