StarBoardLink EZ
2.3.5 Connecting the USB Cable
(1) Prepare the cable holder used to fix the USB cable in place.
When installing onto a wall etc. where magnets cannot be used, attach double-sided tape to the back
of the cable holder before starting installation. Attach the double-sided tape in the position shown
below.
Double-sided tape
*This step is not required when using magnets for installation.
(2) Install the cable holder, and then hook the USB cable into the holder to fix it in place.
Fixing Screws
When installing onto walls where magnets cannot be
used, fix in place with screws after attaching with
double-sided tape to prevent the cable holder from falling.
(3) Connect the USB cable to the computer.
Cable holder
Cable holder
2-10
Assembly and Setup
USB cable
English