Table of Contents
Advertisement
Problems in the control panel
Symptom
Did you load wet laundry?
The detergent
Moist or wet laundry may be detected as a
indicator
larger wash load.
recommends a
large amount of
Did you load a lot of thick items?
detergent, even for
Thick items may be detected as a larger wash
small wash loads.
load due to their heavy weight.
Is the laundry concentrated on one side?
If the laundry is concentrated on one side or
The detergent
is tangled, the wash load cannot be properly
indicator
detected and may be detected as smaller.
recommends a
Did you load a lot of items made of polyester or
small amount of
other synthetic materials?
detergent, even for
Items made of polyester or other synthetic
large wash loads.
materials may be detected as a smaller wash
load due to their light weight.
Wash load detection can take anywhere
between 30 seconds to 2 minutes. When you
The detergent
start an operation with water (about 3 L or
indicator is delayed
more) already in the drum, or when you are
or does not appear.
using the [BLANKET], [DELICATE], or [TUB
CLEAN] program, the indicator does not
appear.
The 0.8 and 1.0
cup displays do
Only the 0.3 and 0.6 cup displays appear
not appear for the
detergent indicator
for the detergent indicator when using the
when using
[SPEEDY] program.
the [SPEEDY]
program.
The display flickers
The display may flicker for brief moments due
for a moment upon
to the internal operations of the control panel.
starting.
Did you add excessive amounts of detergent?
When excessive foaming occurs, operations
The [WASH] time
and number of
may be prolonged for up to 15 minutes, as
[RINSE] indicators
an operation to reduce foaming is performed
display a rotating
automatically.
pattern.
The indicators will display a rotating pattern
during this operation.
(For details on error codes (CXX), see (P. 79, 80))
Possible cause
Solution
This is not a malfunction.
This is not a malfunction.
Load laundry into the drum carefully to avoid
concentration on one side.
(P. 19, 20)
This is not a malfunction.
This is not a malfunction.
This is not a malfunction.
This is not a malfunction.
This is not a malfunction.
See "Examples of indicator displays during
operation"
(P.
8).
Refer to the detergent indicator to determine the
appropriate amount of detergent.
(P. 26, 28)
91
Hide quick links:
Advertisement
Chapters
Table of Contents
