Table of Contents
Advertisement
Adding Detergent and Softener
Wash load detection and detergent indicators
Load the laundry, select a program, and press
[START].
The drum rotates, and detects the size of the
wash load.
If there is 3 L of water in the drum or the [BLANKET],
[DELICATE], [TUB CLEAN], or [TUB DRY] program is
selected, the wash load will not be detected and the
detergent indicator (guide) will not appear.
The detergent indicator (guide) appears.
The approximate operation time appears about 6 seconds
after the amount of detergent appears.
(The detergent cup indicator will not change.)
Display example:
1 hour 30 minutes
Open the detergent dispenser, and refer to the
table to the right to add the detergent, bleach,
and softener.
Water will be supplied about 1 minute after the detergent
indicator appears. If you press the blinking program button
(
or
), water supply will start immediately.
If you cannot add the detergent before water supply starts, press
the [PAUSE] button to prevent it from starting. After adding the
detergent, press [PAUSE] again to resume the operation.
Detergent Do not use detergents that foam excessively. The foaming of some detergents may
result in malfunctions (water leakage, electrical shock).
Do not use powder soap made from natural fats and oils. Such soaps may clog the
machine pipeline, resulting in malfunction or water leakage.
When using detergents that foam easily, use slightly less than the recommended
amount.
Do not use chlorine-based bleach in programs other than [TUB CLEAN].
Bleach
Doing so may result in malfunction of the machine.
Softener Do not dilute concentrated softeners.
Doing so may result in caking and stains.
26
Display during load
detection
Display example:
30 minutes
Notes on detergent, bleach, and softener
Display examples:
Wash load
Detergent
(approx.)
indicator
6 to
10.5 kg
4 to 6 kg
1 to 4 kg
1 kg or
less
(1.0 cup)
(0.8 cup)
(0.6 cup)
(0.3 cup)
Hide quick links:
Advertisement
Chapters
Table of Contents
