Super Password Loss; Cooling System Failure - HP A-F5000 Installation Manual
Hide thumbs
Also See for A-F5000:
- Product end-of-life disassembly instructions (4 pages) ,
- Getting started manual (145 pages)
Table of Contents
Advertisement
Save the new password.
4.
[Sysname] save
NOTE:
To save the new password, execute the save command after modifying the user password.
•
HP recommends saving the modification as the default configuration file.
•
Super password loss
In the case of super password loss, you cannot perform higher level operations.
You can clear the super password by selecting 8 on the main BootWare menu.
========================<EXTEND-BootWare MENU>========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Modify BootWare Password
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Clear Super Password
|<9> Storage Device Operation
|<0> Reboot
======================================================================
Enter your choice(0-9):8
The following output indicates that you have successfully cleared the super password.
Clear Application Password Success!
NOTE:
Select option 8, quit the menu, reboot the firewall, and then you can enter system view directly.
•
This setting (password clearing) is valid only for the first reboot of the firewall. The super password will
•
be restored after a second reboot.
Cooling system failure
When the temperature inside the firewall exceeds 75°C (167°F), the following information appears on
the configuration terminal:
%May 14 21:37:35:271 2010 HP DRVMSG/3/Temp2High:
Environment temperature too high in Slot 0, index is 2.
#May 14 21:37:35:713 2010 HP DEV/1/BOARD TEMPERATURE UPPER:
Trap 1.3.6.1.4.1.2010.2.23.1.12.1.16: frame Index is 0, slot Index 0.0
%May 14 21:37:35:713 2010 HP DEV/4/BOARD TEMP TOOHIGH:
Board temperature is too high on Frame 0 Slot 0, type is MPU.
62
|
|
|
|
|
|
|
|
|
|
Advertisement
Table of Contents
