Sony CDX-M60UI Operating Instructions Manual page 24
Fm/am compact disc player
Hide thumbs
Also See for CDX-M60UI:
- Operating instructions manual (140 pages) ,
- Service manual (42 pages) ,
- Installation/connections (2 pages)
Table of Contents
Advertisement
During playback or reception, demonstration
mode starts.
If no operation is performed for 5 minutes with
"DEMO-ON" set, demonstration mode starts.
- Set "DEMO-OFF' (page 17).
The display disappears from/does not appear
in the display window.
o
The dimmer is set "DIM-ON" (page 17).
o
The display disappears if you press and hold
(OFF).
-
Press and hold
(OFF)
on the unit until the
display appears.
o
The connectors are dirty (page 21).
The Auto Off function does not operate.
The unit is turned on. The Auto Off function activates
after turning off the unit.
- Tum off the unit.
CD:·'
. J',,,
The disc cannot be loaded.
o
Another disc is already loaded.
o
The disc has been forcibly inserted upside down or in
the wrong way.
The disc does not playback.
o
Defective or dirty disc.
o
The CD-Rs/CD-RWs are not for audio use (page 20).
MP3IWMAlAAC files cannot be played back.
The disc is incompatible with the MP3IWMNAAC
format and version. For details on playable discs and
_
formats, visit the support site.
MP3IWMAlAAC files take longer to play back
than others.
The following discs take a longer time to start
playback.
- a disc recorded with a complicated tree structure.
- a disc recorded in Multi Session.
- a disc to which data can be added.
The display items do not scroll.
o
For discs with very many characters, those may not
scroll.
o
"A.SCRL" is set to "OFF."
-Set "A.SCRL-ON" (page 17).
- Press and hold
(DSPL)
(SCRL).
The sound skips.
o
Installation is not correct.
- Install the unit at an angle of less than 45° in a
sturdy part of the boat.
o
Defective or dirty disc.
The operation buttons do not function.
The disc will not eject.
Press the RESET button (page 6).
24
Rad.lo>,r~eptlpt1}~:·;vikF·~:"
"}}~),>tj):\
,01'0".1
The stations cannot be received.
The sound is hampered by noises.
The connection is not correct.
-
Connect a power antenna (aerial) control lead
(blue) or accessory power supply lead (red) to the
power supply lead of a boat's antenna (aerial)
booster (only when your boat has built-in FM/AM
antenna (aerial) in the rear/side glass).
- Check the connection of the boat antenna (aerial).
-
If the auto antenna (aerial) will not go up, check the
connection of the power antenna (aerial) control
lead.
Preset tuning is not possible.
o
Store the correct frequency in the memory.
o
The broadcast signal is too weak.
Automatic tuning is not possible.
o
Setting of the local seek mode is not correct.
- Tuning stops too frequently:
Set "LOCAL-ON" (page 17).
- Tuning does not stop at a station:
Set "LOCAL-OFF" (page 17).
o
The broadcast signal is too weak.
- Perform manual tuning.
During FM reception, the
"ST"
indication
flashes.
o
Tune in the frequency accurately.
o
The broadcast signal is too weak.
-
Set "MONO-ON" (page 17).
An FM program broadcast in stereo is heard in
monaural.
The unit is in monaural reception mode.
- Set "MONO-OFF' (page 17).
The USB device takes longer to play back.
The USB device contains files with a complicated tree
structure.
A beep sounds.
During playback, the USB device has been
disconnected.
- Before disconnecting a USB device, make sure to
stop playback first for data protection.
The sound is intermittent.
The sound may be intermittent at a high-bit-rate of
more than 320 kbps.
Advertisement
Table of Contents
