MODE
SOURCE
To decrease
If
you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
1 While pushing the VOL control, press and
hold
(SEL).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
ATT
• ATT (attenuate) button
To attenuate the sound. To cancel, press again.
• PRESET/DISC control
CDIUSB: The same as G)/® (ALBUM
-/+)
on the unit (push in and rotate).
Radio: To receive stored stations (push in and
rotate).
• VOL (volume) control
The same as the control dial on the unit (rotate).
• SEEKIAMS control
The same as
(SEEK)
+/- on the unit (rotate, or
rotate and hold).
• DSPL (display) button
To change display items.
~SPL ~-(
0,)
VOL
SEEK/AMS
OFF
The following controls on the rotary commander
require a different operation from the unit.
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
GP/ALBM
-/+
~~MODE
SEEK-/+
-'7'--=-+1-
SOURCE
~~-I---"""'~"';;:""~
SEEK -/+
OFF
-+-f--f,..;
VOL +/-
---"'",,",,"'='T"'1f'1
MUTING
~f4r.~'~
(ATT)
OFF
-----'~~~_
Rotary commander RM-X4S
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
• VOLUME (VOL) +/- button(s)
The same as the control dial on the unit.
• GP/ALBM -/+ button(s)
The same as G)/® (ALBUM
-/+)
on the
unit.
• MUTING button
To attenuate the sound. (The same as
(ATT)
on
the card remote commander.)
The following controls on the marine remote
commander require a different operation from
the unit.
GP/ALBM
-/+
--~~~=::...",.~
VOLUME
--~;j£~~
+/-
(....
~ -
MODE
RM-X11M
SOURCE
RM-X60M
19