Table of Contents
Advertisement
3
Safety precautions
Do not disassemble the camera. To prevent electric shock, do not remove the cover. The unit contains no
user-serviceable parts. If the camera isn't working properly, have it repaired at a qualified service center.
Avoid placing the camera in direct sunlight. Do not aim the camera at bright objects. Whether the
camera is in use or not, do not face it towards direct sunlight or other extremely bright objects. Direct
sunlight or bright objects can cause blooming or smear to occur.
Handle the camera with care. Always handle and store the camera with care. The camera could be
damaged by improper handling or storage.
Do not use strong solvents or detergents to clean the camera. If the camera is dirty, wipe it with a
clean, dry cloth to clean it. If wiping the camera does not remove dirty residue, you may clean the unit
using a mild detergent solution.
Install and mount the camera in the proper position. This camera is designed for mounting on the
ceiling or wall. Do not install the camera upside down or at an angle. If you mount the camera improperly,
it may malfunction.
Before operating the camera, check the temperature, humidity, and power source ratings. Use the
camera under conditions where temperature is between 4 to 120°F (-10 to 50°C), and humidity is below
90%. The input power source is 24 VAC or 24 VDC.
Advertisement
Table of Contents
