Table of Contents
Advertisement
2
GE 16X PTZ Camera
User Manual
Product overview
The GE 16X PTZ cameras are designed for installation in an indoor/outdoor video surveillance system.The
camera incorporates the digital signal processor, pan/tilt mechanism, a X16 zoom lens and an RS-485
communication interface in a compact enclosure.
References and related documentation
For more information on the KTD-405 controller keypad, refer to:
•
KTD-405/KTD405A User Manual (1036547)
Features
High Sensitivity support. The camera provides the high quality picture with 1/4 inch Super HAD CCD
effective pixels.
Preset tour. A preset tour moves the camera through a set of programmed positions. A maximum of 63
presets can be created. Using a keypad, you can register a combination of up to 18 presets per tour. The
camera movement speed and holding time are adjustable. Four preset tours can be created.
Shadow tour. A shadow tour is a tour that the camera "learns" by recording manual pan, tilt, and zoom
operations. A shadow tour can be stored and replayed.
Note: When the shadow tour recording memory is full, the shadow tour recording will automatically stop.
Autopan. The Autopan function pans the camera between 2 preset positions periodically.
Autoflip. The autoflip function allows the tilt angle to widen up to 180°. The image on the monitor screen
is flipped horizontally and vertically at the tilt angle of approximately 90°.
Optical Zoom. The optical zoom range is 1X to 16X.
Digital Zoom. Digital zoom enhances the systems zoom range to 8 times beyond the 16X optical zoom
limit. By utilizing the digital zoom function, the total system zoom range increases from 16X (1X digital
zoom) to 128X (8X digital zoom).
Alarm in function. Alarm signals are supplied from external devices through the ALARM IN connector.
When the signal is received, the camera turns to a preset position.
Protocols. GE and Pelco protocols are supported. The usable protocols are DIGIPLEX RS-422 (default),
IMPAC RS-485, ASCII, and PELCO D and P.
Connection capability up to 256 cameras. This camera can be connected to a maximum of 256 other
cameras.
Note: The maximum number of cameras that can be connected varies depending on which control protocol is used.
Power supply. Use a 24 VAC/24 VDC certified/listed class 2 power supply to power the camera.
Advertisement
Table of Contents
