Perimetr Part; Using Perimetr Part; Partially Turn On The Perimeter - Bosch Security System User Manual
Security system
Hide thumbs
Also See for Security System:
- User manual (88 pages) ,
- Owner's manual (72 pages) ,
- User manual (76 pages)
Table of Contents
Advertisement
PERIMETR PART ?
Partially Turn On the Perimeter
Description
This function is used to turn on the perimeter of your building
while selected portions of the perimeter remain turned off.
Perimeter points that are not secure (faulted) when this function
is entered are automatically bypassed and are not included in the
system. This function does not turn on the interior of your
building. Entry/exit delays are provided with this arming
command.
Use this function in residential systems to turn on the front of
your house while the interior and the rear perimeter doors are
left turned off, giving you freedom of movement between the
house and patio.
In commercial systems, when you need access to the large
overhead doors to receive deliveries, using this function allows
you to keep the rest of the building perimeter armed.
Using Perimetr Part:
1.
Ensure that the keypad shows disarmed idle text. Before
using this function, decide which points are to be left turned
off. Fault the points (doors and windows) by leaving them
open. The points must remain open until after the exit
delay time expires.
2.
Press the COMMAND bar. The display shows SYSTEM
COMMAND.
3.
Press the 8 key.
Note:
If you prefer, you might use the Command Menu in place
of steps 2 and 3 to initiate this function. Press the MENU
key to enter the Command Menu, then press NEXT
repeatedly until you reach the PERIMETR PART ?
prompt. Press ENT.
4.
The display shows EXIT NOW #. When exit delay time
expires and the system turns on, the display shortens to
PERIMETR PARTIAL.
8
Hide quick links:
Advertisement
Table of Contents
