Set Number Of Channels (4C) - Bosch Integrus Operation Manual
Language distribution system
Hide thumbs
Also See for Integrus:
- Installation and operation manual (90 pages) ,
- User manual (72 pages) ,
- Installation and operating manual (60 pages)
Table of Contents
Advertisement
Language Distribution System
Menu Item
4B Network Mode
Notice!
In case 'Standalone' is selected and the transmitter is connected to a DCN Next Generation
or DCN wireless system, the audio in the system can be disrupted.
In case 'Enabled' is selected, while no DCN Next Generation or DCN wireless system is
connected, the transmitter will show the fault status "Network Error".
In case 'Enabled' is selected and the transmitter cannot connect to the optical network (e.g.
because the control unit of the DCN Next Generation conference system is switched off), the
emergency contact does not function.
7.2.4
Set number of channels (4C)
Via sub-menu item 4C the number of channels that will be used can be set. Note that the
maximum number of channels depends on the transmitter type (4, 8, 16 or 32 channels) and
the chosen quality modes. When a DCN Next Generation or a DCN wireless system is
connected to the transmitter, the number of channels can be automatically set by the
connected system.
Menu Item
4C Nr. of Ch.
Bosch Security Systems B.V.
Options
Mode:
- Standalone
- Enabled
Options
Nr. of channels
* - Automatic: nn
- Manual: nn
Operation manual
Description
Required when the transmitter is used as
standalone device.
Required when the transmitter is used in
combination with DCN Next Generation or
DCN wireless.
Description
The number of used channels is set
automatically to the maximum possible
number of channels (depending on
transmitter type and the selected quality
modes). When a DCN Next Generation or a
DCN wireless system is connected to the
transmitter, the number of channels is
determined by the settings of the connected
system.
Set the number of used channels (the
maximum number depends on the transmitter
type and the selected quality modes). An
asterisk (*) is shown when the selected
number is not possible because it is higher
than the maximum number of channels.
Configuration | en
53
2013.11 | V1.4 |
Hide quick links:
Advertisement
Table of Contents
