Mount Radiator On A Ceiling; Mount Radiator On Horizontal Surfaces; Secure The Radiator With Safety Cord; Integrus Receivers - Bosch Integrus Operation Manual
Language distribution system
Hide thumbs
Also See for Integrus:
- Installation and operation manual (90 pages) ,
- User manual (72 pages) ,
- Installation and operating manual (60 pages)
Table of Contents
Advertisement
40
en | Installation
5.3.5
Mount radiator on a ceiling
The radiators can be attached to the ceiling using the supplied suspension bracket. This
ensures enough space for a proper air flow around the radiator. Mounting a radiator in the
ceiling will in most cases require a forced air flow by means of a ventilator to prevent
overheating. If this is not possible, switch the radiator to half power.
5.3.6
Mount radiator on horizontal surfaces
When the radiator has to be positioned a horizontal surface (e.g. on top of an interpreter
booth), the distance between the radiator and the surface must be at least 4 cm (1.5 inch) to
enable enough air flow around the radiator. This can be achieved by using the suspension
bracket as a support. If this is not possible, switch the radiator to half power. If the radiator is
used at full power on top of an interpreter booth, the ambient temperature must not exceed
35° C.
5.3.7
Secure the radiator with safety cord.
The radiator is supplied with a safety eye to secure the radiator with a safety cord (not
supplied).
1.
2.
3.
4.
Warning!
Suspending any object is potentially dangerous and should only be attempted by individuals
who have a thorough knowledge of the techniques and regulations of rigging objects
overhead. Bosch strongly recommends that radiators be suspended taking into account all
!
current national, federal, state and local regulations.
It is the responsibility of the installer to ensure that radiators are safely installed in
accordance with all such regulations. If radiators are suspended, Bosch strongly recommends
that the installation is inspected at least once a year. If any sign of weakness or damage is
detected, remedial action should be taken immediately.
5.4
Integrus receivers
The infrared receivers can operate with disposable batteries (2x AA-size alkaline cells) or with
a rechargeable battery pack (LBB 4550/10).
Insert the batteries or the battery pack in the receiver with the correct polarity as indicated in
the battery compartment. The battery pack has a separate connection cable which must be
connected to the receiver. When this connection is not present, the charging circuitry in the
receiver will not work. This also prevents the unwanted charging of disposable batteries. The
battery pack has a temperature sensor which prevents overheating during charging.
For more information about charging the battery pack see section Integrus Charging Units,
page 71.
Notice!
Disposable batteries and battery packs at the end of their technical lives should be discarded
with due care for the environment. When possible, take batteries to a local recycling station.
2013.11 | V1.4 |
Mount the safety eye properly in the hole of the radiator.
Make sure that: The minimum strength of the safety cord, mounting material, shackle and
supporting building structure should withstand 1,500 N. The length of the safety cord is
not more than 20 cm longer than needed.
Mount the safety cord to the safety eye.
Mount the safety cord to the supporting building structure.
Operation manual
Language Distribution System
Bosch Security Systems B.V.
Hide quick links:
Advertisement
Table of Contents
