Philips Fax Machine Overview page 31
Philips fax machine
Hide thumbs
Also See for Fax Machine:
- User manaul (60 pages) ,
- User manual (44 pages) ,
- Manual (36 pages)
Advertisement
Your fax machine is equipped with a digital telephone
answering machine. All recorded messages are stored in a
solid-state electronic memory which has a recording
capacity of up to 25 minutes. There is neither a magnetic
tape nor a cassette.
Your answering machine is factory-programmed with a
recorded outgoing message. If you want to record your
own outgoing message, proceed as described under
"Recording a message". Write down your messages before
you record them.
Make sure that your fax machine stands on a hard, flat
surface, because otherwise the microphone may be
covered.
Activate or deactivate your answering machine with ON/OFF.
Activate mode is indicated with the symbol b on the display.
Hold down RECORD for two seconds. Press RECORD
again, until you hear a confirmation tone. Lift the handset
and start to record your message.
A black bar indicates you how much memory is available for
the outgoing message (max. 20 seconds).
Stop recording by pressing RECORD or STOP.
The new answering message is automatically replayed. By
pressing u you can change the volume of the message.
To hear the message again, press RECORD for a while (two
y
y
seconds) and then y
y .
y
Select MENU 51 and press OK.
Press u to choose between 30, 60, 120 seconds or the
AUTO mode (unlimited recording time). Please note that
AUTO mode is not available in all countries.
Confirm with OK.
If the green lamp for the answering device b flashes,
messages have been recorded for you. Press y
to the first message. The date and time the message was
received will be shown on the display.
The next message will be replayed if you press y
listening to any message.
If you want to switch to the first message while listening to
the other messages, press 1.
After listening to your messages the green lamp of the
answering device b will stay on until all messages have
been erased.
Press u while playing back messages. The current
volume setting will be displayed.
Press u to obtain the desired volume.
If you want to delete the message which is currently being
played, press CLEAR.
You will be asked on the display if you really want to delete
this message. Press CLEAR again.
Press CLEAR after having listened to all messages.
If you actually want to delete all messages, press CLEAR
again. To interrupt the deleting process press STOP.
y
y
y to listen
y
y while
y
y
y
Advertisement
