Before Setting Surface Controls - Kenmore Double Oven Range Use & Care Manual
Hide thumbs
Also See for Double Oven Range:
- Use & care manual (60 pages) ,
- Use and care manual (44 pages) ,
- Use & care manual (16 pages)
Table of Contents
Advertisement
Available languages
Available languages
Before Setting Surface Controls
To Set the Cooktop Lockout Feature
The COOKTOP
pad is used to activate the Cooktop Lockout feature which will lock all surface elements from being
accidentally turned ON. This feature will only lock the cooktop.
To turn the Cooktop Lockout Feature ON:
1.
BE SURE ALL surface element controls are set to the OFF position.
2. Press and hold for 3 seconds COOKTOP
the display (Figure 1). If a triple beep sounds instead, check all surface
elements and turn them to the OFF position and repeat this step. The
two
will appear in the display indicating the cooktop controls and
functions are locked out until the cooktop is unlocked. Whenever the
Cooktop Lockout feature is active, " - -" will appear in all of the surface
element display windows.
To turn the Cooktop Lockout Feature OFF:
1.
Press and hold for 3 seconds COOKTOP
from the display (Figure 2). This will indicate the cooktop may be used
normally.
Note: Starting a Self-Clean cycle will automatically turn ON the Cooktop
Lockout feature. The cooktop will remain locked until the Self-Clean cycle
has completed and the oven door has unlocked.
Note: If a power failure occurs after the Cooktop Lockout has been
activated, you must turn OFF the Cooktop Lockout feature before being able
to use the cooktop features again.
INSTRUCTIONS
(cont'd)
until two
appears in
until the two
disappears
8
PRESS
for 3 seconds
for 3 seconds
DISPLAy
Figure 1
Figure 2
Hide quick links:
Advertisement
Chapters
Table of Contents
