Function
Upper: Function name and options
to be displayed
Middle: Name
Lower: Description
ST.NO: (1 ~ 99)
Station Number function:
Sets a device number (unit) used
for RS-232C communication
BAUD.R: (9.6 ~ 57.6 kbps)
Baud Rate function:
Sets RS-232C communication
speed
OUT.D: (0 ~ 160 ms) 20 ms
Output Delay function:
Outputs inspection results after the
original output timing
CAP.D: (0 ~ 160 ms) in the 1 ms
Capture Delay function:
Sets the time delay from TRIGGER
signal input to image capture
I.TRR: (ON / OFF)
Internal Trigger function:
INI.T: (1 ~ 7)
Initial Type:
The selected product type number
when the LightPixAE20 is turned on
(available only for colored areas)
SPEED: High / Middle / Low
Speed:
Allows you to select the processing
time of measurement
DIRC.T: Both / DX / DY
Direction Type:
Allows you to select a direction in
which lengths are measured
OUT.T: Black / White
Measurement Object Color:
Allows you to select an object color
to be measured
VER
Version:
Version, Size of view range and
system and operation unit versions.
T.TRG: (ON / OFF)
Teaching Trigger function:
Sets external trigger to ON (valid) or
OFF (invalid)
A.BACK: (ON / OFF)
Answer back function:
Displays a detected color in blue on
the finder unit.
86
Display on the operation unit
The left LCD display shows default settings.
(
(Size of view range differs dependon the product number.)
)
When the function is set to ON, the
AE20 automatically performs continuous
inspections.When OFF, it performs an
inspection every time trigger signal input.