3.2.2 Connection of the Operation and Finder Units
You can mount the finder unit on the operation unit without using any cables. Use the connector for
connecting the operation unit or finder unit on each unit.
To mount the operation unit on the finder unit:
1. Insert the operation unit into the finder unit until it clicks.
To remove the operation unit from the finder unit:
1. Hold the finder unit with one hand.
2. Hold the operation unit with the other hand and lift the operation unit in the arrow direction.
•
When using the finder unit, mount the operation unit on the finder unit first and connect the
devices with the optional cable for connecting to the main unit
•
Do not mount the operation unit on the finder unit while the operation unit is running. Failure to do
so may result in the product damage.
14