Table of Contents
Advertisement
(3)
Move the front alignment plate guide in the
direction of the arrow.
(4)
Release the latch, and then disconnect the
connector to take off the finishing tray paper
detection sensor.
[M] Movable tray position-a sensor (S13) / Movable tray position-B sensor (S14) / Movable tray
position-c sensor (S15)
(1)
Take off the rear cover.
P.4-6 "[G] Rear cover"
(2)
Move the movable tray shift frame to the mid-
dle position. If the movable tray shift frame
needs to be lowered, push the gear of the
movable tray shift motor unit in the direction
of the arrow to unlock the frame. (Be sure to
hold the movable tray gear frame with your
hands because it may fall when the gear is
pushed.)
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
Finishing tray paper detection sensor
Front alignment plate guide
Gear of the
movable tray
shift motor unit
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 100
Fig. 4-282
Movable tray
Fig. 4-283
Hide quick links:
Advertisement
Table of Contents
