Weight Of The Door/Drawer Fronts; Building Into A Peninsular Run; Building-In At The End Of A Run Of Units - Miele KF 1801 Vi Operating And Installation Manual
Frost free fridge freezer with masterfresh zone and ice cube maker
Hide thumbs
Also See for KF 1801 Vi:
- Operating and installation manual (88 pages) ,
- Operating and installation instructions (84 pages) ,
- Installation instructions manual (20 pages)
Table of Contents
Advertisement
Weight of the door/drawer
fronts
Before fitting the door/drawer fronts,
ensure that the weight of the fronts
does not exceed the maximum
permitted:
Max.
weight
of
Appliance
refrigerator
door front
in kg
KF 1801 Vi,
47
KF 1811 Vi
KF 1901 Vi,
38
KF 1911 Vi
Fitting a door which is heavier than
the maximum permitted could
damage the hinges.
Building into a peninsular run
When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Building-in at the end of a run
of units
Max.
If one side of the appliance is visible, a
weight of
side panel is required.
freezer
The side panel must be fixed to the
drawer
wall, the floor and any furniture/units
front
above before the appliance is placed in
in kg
the niche.
10
The size of the side panel must match
that of the furniture panel opposite.
14
Installation
69
Advertisement
Table of Contents
