Switching On And Off; Switching The Appliance On; Operation - Miele KF 1801 Vi Operating And Installation Manual
Frost free fridge freezer with masterfresh zone and ice cube maker
Hide thumbs
Also See for KF 1801 Vi:
- Operating and installation manual (88 pages) ,
- Operating and installation instructions (84 pages) ,
- Installation instructions manual (20 pages)
Table of Contents
Advertisement
Switching on and off
Before using for the first time
^ Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hours after
transporting it to its final location
before connecting it to the mains.
Switching the appliance on
^ Open the upper door.
^ Press the rocker switch on the right
side under the control panel.
This switches all of the zones in the
appliance on or off together.
The appliance will start to cool, and the
interior lighting will come on when the
door is opened.
The access sensor in the control panel
will also light up.
14
To enable the temperature to get
sufficiently cold inside the
appliance, allow the appliance to
run for a few hours before placing
food in it.
Do not place food in the freezer
section until the temperature is at
least -18°C.
Please note: switching off with the
rocker switch does not disconnect
the appliance from the mains.
Operation
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Please note:
– A sensor that is available for
selection is always highlighted in
white.
– A sensor that has been selected is
always highlighted in yellow.
^ Touch the access sensor so that it is
highlighted in yellow.
The sensors for the four zones in the
appliance will now appear in the control
panel: refrigerator zone, left- and
right-hand MasterFresh zones and
freezer zone.
Advertisement
Table of Contents
