Cgpaddr, Gprs Addresses - Motorola G24 Guide Developer's Manual
At commands
Hide thumbs
Also See for G24 Guide:
- Developer's manual (101 pages) ,
- Developer's manual (86 pages) ,
- User manual (260 pages)
Table of Contents
Advertisement
GPRS/EDGE
Example
AT+CGACT=?
+CGACT: (0,1)
OK
AT+CGACT?
+CGACT: 1,0
+CGACT: 2,0
+CGACT: 3,0
OK
AT+CGACT=1
ERROR//GPRS network not present.
Note:
CGPADDR, GPRS ADDResses
This command reads the allocated PDP addresses for the specified context identifiers.
Command
Type
Set
Read
Test
3-336
In some GPRS networks, +CGACT is not supported. the ATD*99 # command can be
used to establish a connection.
Activating a context can take up to 150 seconds.
Deactivating a context can take up to 40 seconds.
When aborting a +CGACT Set command, the context is closed. This can take up to 40
seconds.
Syntax
AT+CGPADDR=[<cid
>[,<cid>[,]]]
AT+CGPADDR?
AT+CGPADDR=?
AT Commands Reference Manual
Response/Action
+CGPADDR:<cid>,<P
The Set command returns a list of PDP
addresses for the specified context
DP_addr>[<CR><LF>
identifiers.
+CGPADDR:<cid>,<P
DP_addr>[...]]
OK
or:
+CME ERROR:<err
+CME ERROR:<err>
The Read command returns an error.
+CGPADDR:(list of
The Test command returns the list of
defined <cid>s.
defined <cid>s)
OK
or:
+CME ERROR: <err>
Remarks
December 31, 2007
Hide quick links:
Advertisement
Table of Contents
