Clck, Facility Lock - Motorola G24 Guide Developer's Manual

Hide thumbs Also See for G24 Guide:

Table of Contents

+CPWD: ("SC",8),("AO",8),("OI",8),("OX",8),("AI",8),("IR",8),("AB",8),("AG",8), ("AC",8),("P2",8)

+CME ERROR: operation not supported

AT+CLCK: "sc",1,"current pin password"

AT+CPWD="sc","incorrect old password","new password"

+CME ERROR: incorrect password

AT+CLCK="sc",2

AT+CPWD="sc","old password","new password"

+CME ERROR: operation not allowed

AT+CLCK="fd",1,"current pin2 password"

AT+CPWD="p2","old password","new password"

AT+CLCK="ai",2

AT+CLCK="ai",1,"correct password"

AT+CLCK="ai",2

AT+CPWD="ai","old password","new password"

+CLCK, Facility Lock

This command locks, unlocks or interrogates a G24 or a network facility <fac> (any kind of call

barring program). A password is mandatory for performing locking and unlocking actions, but

not for querying. The features of the G24 that are affected by this are the keypad power-up

operation and fixed dialing list. When querying the status of a single call barring program

<mode>=2, the <status> for each call type will be returned.

For <fac>="SC", SIM Card PIN setting and for <fac>="FD", SIM Fixed Dialing memory setting,

the <class> is irrelevant (For more information about <class>, refer to the following table shows

the +CLCK parameters.). The <passwd> for "SC" is SIM PIN, and for "FD" it is SIM PIN2.

December 31, 2007

AT Commands Reference Manual

Chapter 3: AT Commands Reference

Show Quick Links

Table of Contents