Yamaha A4000 Owner's Manual page 38

Professional sampler
Hide thumbs Also See for A4000:
Table of Contents

Advertisement

ESSENTIAL PROCEDURES
3.
Select a Record Type
With the topmost function line on the display highlighted (use Knob 1 to select the top line if it is not
already selected), use Knob 2 to select the "New" Record Type. This is the Record Type to select when
you want to record a new sample to the sampler's memory.
• In addition to "New," you can select "New+" to append the recorded data to the end of the currently
selected sample, "Replc" to replace a specified existing sample, or "Save" to automatically save
the recorded data to disk. See page 153 for details.
4.
Select an Input
Use Knob 1 to highlight the third function line on the display, then use Knob 2 to select the input to
which your source is selected. If you have connected a mono microphone to the "L" input, for exam-
ple, use Knob 2 to select "AD L". If you have a stereo microphone or line source connected to the "L"
and "R" inputs, select "AD L/R".
• If you have installed the optional AIEB1 I/O Expansion Board (page 13, 14), you will also be able
to select "DIGITAL" (the coaxial SPDIF digital input on the expansion board, or "OPTICAL" (the
optical digital input on the expansion board).
• The A5000/A4000 also allows you to select "StOut" in order to directly re-sample the output signal
from the sampler's stereo outputs.
38
Chapter 2 Sampler Basics & Essential Procedures
• A5000/A4000

Advertisement

Table of Contents
loading

This manual is also suitable for:

A5000

Table of Contents