Yamaha A4000 Owner's Manual page 105
Professional sampler
Hide thumbs
Also See for A4000:
- Owner's manual (27 pages) ,
- Supplementary manual (25 pages) ,
- Service manual (61 pages)
Table of Contents
Advertisement
Knob 5
[
Turn] Effect Edit Type
Specifies the the selection method to be used for select-
ing effect parameters.
[Range] full, favorite
• full ... This setting allows you to select and set any
parameter from the full range of parameters
available for the selected effect. Although you
have access to all parameters, it can take a lit-
tle more time to locate the desired parameters
using this method.
• favorite ... You have immediate access to four of
your "favorite" parameters.
[DISPLAY]
q
The PLAY-EFFECT-EfSetupA/B (EfrSetup on the A4000) page
shows the specified Effect Output (page 102) and Effect Connect
type (page 103).
Effect Edit Type = full
Cursor w
Cursor
w
Knob 1
Knob 2
Turn
Cursor/Page
Effect #
action
Press
Tree View
—
action
Knob 1
Same function as cursor
Knob 2
[
Turn] Effect # (Effect Number)
Selects the effect to be edited.
[Range] Ef1 — Ef6 (Ef1 — Ef3 on the A4000)
• The effect type assigned to the selected effect will be
shown on the display (page 102).
Knob 4
[
Turn] Parameter # (Parameter Number)
Turn either knob to select the parameter whose value you
want to view or set. You can then set the value using
Knob 5. You can repeat the sequence to set each of the
available parameters: first select the parameter with Knob
4, and then set the value with Knob 5.
Note that the available parameters differ for each effect
type. For a listing of parameters and their meanings, refer
to the "Effect parameter list" in the Appendix. (page 256).
Knob 3
Knob 4
Knob 5
—
Parameter #
Value
—
—
—
q
(page 104).
[Range] 01/Effect Parameters 1 — 16/Effect Parameter
16, --/Input Level, --/Output Level, --/Pan,
--/Width
• 01/Effect Parameters 1 — 16/Effect Parameter
16 ... Depends on the selected effect type.
• --/Input Level ... Sets the level of the signal sent to
the input of the effect.
• --/Output Level ... Sets the effect output level.
• --/Pan ... Turn the knob to set the pan (stereo posi-
tioning) for the effect block's output. Positive
values set pan to the right; negative values set
pan to the left.
If the effect output is stereo, higher absolute
pan settings will narrow the stereo feeling
while noticeably shifting the sound position.
• --/Width ... Sets the stereo width of the effect. Neg-
ative values reverse the stereo image.
• When a selected effect type has less than 16 param-
eters, unavailable parameters will appear as "No./----
--" on the display.
• If the selected Effect Type is "Through," effect
paramerts 1 — 16 will appear as "------" on the dis-
play.
Knob 5
[
Turn] Value
Turn the knob to set the value for the parameter selected
by Knob 4.
Effect Edit Type = favorite
Cursor w
Cursor
w
Knob 1
Knob 2
Turn
Cursor/Page
Effect #
action
Press
Tree View
—
action
Knob 1
[
Turn] Cursor/Page
Positions the cursor and selects display pages.
[
Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[
Turn] Effect # (Effect Number)
Selects the effect to be edited.
[Range] Ef1 — Ef6 (Ef1 — Ef3 on the A4000)
• The effect type assigned to the selected effect will be
shown on the display (page 102).
A5000/A4000 •
PLAY-EFFECT
Knob 3
Knob 4
Knob 5
—
—
—
—
—
—
105
Chapter 4 PLAY Mode
Advertisement
Table of Contents
