Installing An Internal Scsi Hard Disk - Yamaha A4000 Owner's Manual
Professional sampler
Hide thumbs
Also See for A4000:
- Owner's manual (27 pages) ,
- Supplementary manual (25 pages) ,
- Service manual (61 pages)
Table of Contents
Advertisement
Installing Optional Equipment
Installing an Internal SCSI Hard Disk
This section explains how to install a standard SCSI hard disk drive (bare drive) into the A5000/A4000.
SCSI hard disk: Optional
• Before performing the installation, please read precautions "Handling and Installation of Options,"
found at the beginning of this manual.
• Consult your Yamaha dealer for information about SCSI hard disk models that have been confirmed as
operating correctly with the A5000/A4000.
[Procedure]
1.
Be sure that you have the following at hand before starting the installation.
• Internal SCSI hard disk
• Hard disk installation screws (4 pcs.): Available from your hard disk dealer.
• SCSI hard disk cable (50-pin): supplied with the A5000/A4000.
• Hard disk power cable (long red-and-white 4-wire cable): supplied with the A5000/A4000.
• Phillips screwdriver: Magnetic-tipped screwdriver is recommended.
• Screwdriver for the hard-disk installation screws: Note that some hard-disk models do not use Phil-
lips-head screws.
• Workbench: Please carry out all work on a stable workbench or table. Spreading a cloth over the work
surface will help prevent scratching.
• Gloves: Be sure to wear gloves so that your hands are not scratched by the metal cover or other metal
parts.
2.
Check the hard disk settings.
• Be sure that the hard disk's terminator is set to ON. For information about how to make this setting, refer
to the instructions provided with the disk.
• It is recommended that you set the hard disk's SCSI ID to 4, although you are free to set the ID to any
value other than 6 (the factory-set ID for the A5000/A4000). For information about how to make this set-
ting, refer to the instructions provided with the disk.
3.
Remove the top cover (page 232).
240
Appendix
• A5000/A4000
SCSI hard disk cable (50-pin): Supplied
Important
Hard disk power
cable (long): Supplied
Hard disk installation
screws (4 pcs.): Optional
Advertisement
Table of Contents
