Configure Igmp - D-Link DES-3624 Series User Manual
Stackable nway ethernet switch
Hide thumbs
Also See for DES-3624 Series:
- User manual (162 pages) ,
- User manual (177 pages) ,
- User manual (228 pages)
Table of Contents
Advertisement
Stackable NWay Ethernet Switch User's Guide
Figure 6-23. Static Multicast Filtering Table Configuration screen
To add an entry or make a change to an entry on the Static Multicast Filtering Table Configuation
screen, select Add or Remove in the first field, enter the multicast MAC address in the next field, enter the
VLAN ID number, assign the outgoing ports by typing a V, and then press APPLY to put the changes into
effect.
Configure IGMP
Internet Group Management Protocol (IGMP) allows multicasting on your network. When IP Multicast
Filtering is enabled, the Switch can intelligently forward (rather that broadcast) IGMP queries and reports
sent between devices connected to the Switch and an IGMP-enabled device hosting IGMP on your network.
Basically, in these submenus you define whether the Switch can intelligently forward IGMP packets, and you
must also define which 802.1Q VLANs (if present) can send and receive IGMP and Multicast packets.
To access the IGMP Configuration screen, select Configure IGMP from the System Configuration
menu. The following screen appears:
66
Using the Console Interface
Advertisement
Table of Contents
