Firmware and Configuration Update
To update firmware or change a configuration file, fill in the requested information above and then click
the Apply button.
The information is described as follows:
Software Update Mode & TFTP Server Address:
♦ Software Update Mode Set to either Network or SLIP. Determines whether the new firmware code
should be obtained through the Ethernet network or through the console port.
♦ TFTP Server Address The IP address of the TFTP server where the new firmware code is.
♦ Last TFTP Server Address This read-only field displays the IP address of the last TFTP server
accessed.
Update Management Module Firmware:
♦ Firmware Update Determines whether or not the Switch should download its new firmware code
the next time it is booted.
♦ File Name The path and the name of the file which holds the new firmware code on the TFTP
server.
158
Figure 7-52. Firmware and Configuration Update window
Stackable NWay Ethernet Switch User's Guide
Web-Based Network Management