Table of Contents
Advertisement
Preparations
(continued)
Connections
1
Connect the flat cable.
Connecting
Disconnecting
Hold the connector with the recessed part up and press in at
the center until you hear a click.
First connect the blue-colored connector to the terminal of the
sound processor (A), then connect the rest in the order B, C,
D.
Route the cable horizontally (underneath the heat outlet grille)
so that the side with the white-color lead is positioned at the
front.
After connection, fold and press the cable as flat to the back of
the unit as possible.
2
Connect the FM indoor antenna.
Install the antenna on a wall at a height and in a direction
which result in the best reception.
i "— Adhesive tape
-—FM indoor antenna
FM ANT
(included)
O
/—N
75 Q
EE
in
The tip of the internal antenna wire should not come into
contact with any metal objects.
When you cannot get a good reception with this FM indoor
antenna, we recommend you install an FM outdoor antenna
(not included. See page 10). Disconnect the FM indoor an¬
tenna if you install an FM outdoor antenna.
Do not try connecting or disconnecting the flat cable
while the power is switched to ON.
Advertisement
Table of Contents
