Table of Contents
Advertisement
Setting the Time of Day
3-5-7
These instructions explain how to set the time for 16:25 (4:25 p.m.)
on Wednesday.
Switch on the power.
1 Press CLOCK/TIMER to select "CLOCK".
The display will show CLOCK.
The display will return to what was previously indicated if you
allow 7 or more seconds to elapse before you accomplish the
next operation.
2
Press SET.
The day indicator will start to flash.
3
Press one of the SELECT buttons to select
"WED".
Flashing
4
Press SET.
5
Press one of the SELECT buttons to select
"16".
Going from 23:59 to 0:00 on the hour display will not change
the day display.
6 Press SET.
7
Press one of the SELECT buttons to select
"25".
Going from 59 to 00 on the minute display will not change the
hour display.
8 Press SET to finish setting the time.
After about 2 seconds, the display will return to what it were
before entering the clock setting mode.
To display the clock again, press CLOCK/TIMER. The display will
show "CLOCK", and then clock will appear for 5 seconds.
"E" appears on the display if the power cord has been once discon¬
nected or there has been a power failure. If this happens, reset the
time.
25
Advertisement
Table of Contents
