Your Bluetooth must be activated.
If you have not yet connected the camera to
your WiFi network, click on "Mon périphérique
n'est pas connecté à Internet pour l'instant"
(My device is not yet connected to the
internet).
Select the WelcomeEye Look camera from the
list of products compatible with the application:
At this point your camera should be powered
up and ready to be linked. If not, reset as
instructed (by pressing and holding the reset
button for 3 seconds until you hear a beep and
then a melody) and wait until the camera is
ready. The camera emits 2 sets of 5 beeps when
it is ready to proceed.
Then click on "Suivant" (Next).
Your smartphone will detect nearby devices
waiting to be configured. Detection only takes a
few seconds, so move closer to the camera if it is
not detected by the smartphone.
WelcomeEye Look / V3
7