Table of Contents
Advertisement
10. Technical support - Warranty
This product is guaranteed for parts and labour in our workshops.
The warranty does not cover: consumables (batteries, etc.) and damage caused by misuse, improper
use, improper installation, external intervention, damage due to physical or electrical shocks,
dropping or atmospheric phenomena.
• Never cover the device
• Clean with a soft cloth only, no solvents. The warranty is void if parts have been dismantled.
Before cleaning, switch off the appliance and make sure that it does not trigger itself (deactivate
the autotracking function if it is active).
Warning:
Do not use any carboxylic acid, alcohol, or similar chemicals on the product. In
addition to damaging your device, the fumes are also hazardous to your health and are explosive.
Do not use any tool that can conduct voltage (wire brush, sharp tool, etc.) for cleaning.
The receipt or invoice is proof of purchase date.
Contacts and opening hours of our technical support centres are available if necessary at
philips.com
11. Safety measures
Damage caused by failing to adhere to the manual nullifies the warranty. We will not accept
liability for damage resulting from non-compliance! We will not accept liability for any harm to
goods or people caused by improper handling or failure to adhere to safety instructions.
This product was manufactured in total compliance with safety guidelines. In order to maintain
this status and provide for the best possible conditions of usage, the user must adhere to the safety
instructions and warnings in this manual.
This symbol indicates a risk of electrical shock or short-circuiting.
• Only use this product with electrical current in the following ranges: 100 - 240 Volts and 50 - 60
Hertz. Never attempt to use this device at a different voltage.
• Verify that all of the system's electrical connections are consistent with the usage instructions.
• In commercial establishments, be sure to adhere to accident prevention rules for electrical
installations.
• For schools, training equipment, workshops, etc., the presence of qualified personnel is needed to
monitor operation of the electronic devices.
• Adhere to the usage instructions for other devices connected to the system.
• Contact a person with experience if you are unsure about how to operate the system or about the
safety of devices.
• Never plug in or unplug electrical devices with wet hands.
• When installing this product, verify that the power wires are not at risk of being damaged.
• An easily accessible cut-off system (switch disconnector, circuit breaker, equivalent system) must
be integrated into the building's wiring installation for the equipment connected to the power
grid.
• Keep a minimum distance around the device to guarantee sufficient ventilation.
• Ventilation should not be blocked by covering the ventilation opening with an object such as a
newspaper, tablecloth or curtain, etc.
• No open flame source such as a burning candle must be placed on the device.
• Respect the product's operating temperature.
18
WelcomeEye Look / V3
www.
Advertisement
Table of Contents
