English
2.
Insert the dowels of the feeder guide into the holes on the feeder
guide; then move it down until it stops in place.
Dowel of the feeder guide
Attaching the Pocket (only for the ASF model)
A pocket is provided with each auto sheet feeder (ASF) model printer.
Follow the steps shown below to attach the pocket.
1.
Push down the pocket cover on the left of the printer, and remove it.
Note:
To attach the cover again, insert the cover while pushing it up.
2.
Make sure that the ejection lever is open. If it is closed, open it.
The ejection lever is open.
Note:
Be careful not to hurt your fingers on the lever edge.
6 TM-J9000/J9100 User's Manual
➀
The ejection lever is closed.
➁