Advertisement

Quick Links

User's Manual
405074707

Advertisement

Table of Contents
loading

Summary of Contents for Epson C31C522111

  • Page 1 User’s Manual 405074707...
  • Page 2: Dip Switch Tables

    Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s...
  • Page 3: Standards And Approvals

    The connection of a non-shielded printer interface cable to this printer will invalidate the EMC standards of this device. You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation could void your authority to operate the equipment.
  • Page 4: Important Safety Information

    Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire. Immediately unplug the equipment and contact your dealer or a Seiko Epson service center for advice. Never attempt to repair this product yourself. Improper repair work can be dangerous.
  • Page 5: Notes On Usage

    Before moving the product, unplug it and unplug all cables connected to If ink leaks out of the printer, wipe up the ink with a cloth or similar material immediately and contact your dealer or a Seiko Epson service center for advice.
  • Page 6: Notes On Transportation

    English Notes on Transportation ❏ Remove the ink cartridge before transporting the printer. After transportation, install a new ink cartridge. ❏ Keep the printer upright and horizontal during transportion. ❏ Be sure not to ship ink cartridges that have been removed from the packing.
  • Page 7: Part Names

    English Part Names Scanner Roll paper section Card entrance Control panel Feeder Roll paper cover open button Cartridge cover tab Power switch Validation section Locking wire saddle Power supply connector DIP switch 2 USB connector Note: DIP Switch 2 is intended for switching the interface. Do not change the position of the DIP switch 2 except when changing the interface.
  • Page 8 English Insert the dowels of the feeder guide into the holes on the feeder guide; then move it down until it stops in place. Dowel of the feeder guide ➀ ➁ Attaching the Pocket (only for the ASF model) A pocket is provided with each auto sheet feeder (ASF) model printer. Follow the steps shown below to attach the pocket.
  • Page 9 English Position the pocket as shown in the picture below, and push it into the printer until it clicks in place. ➀ ➁ Insert the hooks on the four corners of the pocket into the holes indicated with the circles, and move the pocket into place. Unfold the stopper of the pocket as shown in the following picture.
  • Page 10: Control Panel (Leds And Buttons)

    English Control Panel (LEDs and Buttons) POWER LED POWER LED ERROR LED ERROR LED INK LED (Black) INK LED (Black) INK LED (Color) (Unused) PAPER OUT LED PAPER OUT LED VALIDATION/ VALIDATION/ FEEDER LED FEEDER LED ID LED ID LED (TM-J9100) Two color model (TM-J9000) Single color model POWER LED...
  • Page 11: Cleaning Button

    English ID CARD LED ❏ Comes on when the printer is ready to process ID cards. ❏ Flashes when the printer is waiting for card insertion or removal. CLEANING Button When printing becomes faint or uneven, press this button for more than three seconds.
  • Page 12 A used cartridge may have some ink on the convex part of the bottom of the cartridge. Avoid touching that part to keep your hands clean. Seiko Epson recommends using genuine EPSON cartridges for your printer. Products of other manufacturers may cause damages that are not covered by EPSON’s warranties.
  • Page 13 Hold the knob at the top of the used ink cartridge and lift the cartridge out of the printer. (TM-J9100) Take a new ink cartridge out of its packaging, and remove the yellow tape. CAUTION: Do not remove any tape on which the EPSON logo is printed. TM-J9000/J9100 User’s Manual 11...
  • Page 14 English Carefully insert a new ink cartridge from the top, and push it firmly but gently until it clicks in place. See the picture below to make sure the inserting direction is correct. Color Black (TM-J9100) Close the ink cartridge cover firmly until it clicks in place. The INK LED will now go off.
  • Page 15 English Inserting and Replacing Roll Paper CAUTION: Be sure to use roll paper that meets the specifications. (See the specifications on page 25 of this manual for more details.) To avoid injuries and/or machine failure, make sure not to touch anything other than the roll paper when the roll paper cover is open.
  • Page 16 English Processing Checks The TM-J9000/J9100 is capable of performing the following four actions on a check in a single pass: reading magnetic characters, scanning the image of both the face and the back, and printing a transaction record. Flow of Single Pass Processing Insert a check into the feeder section.
  • Page 17 English With the Auto Sheet Feeder (ASF) Model With the ASF model printers, you can put up to 25 checks in the feeder guide to be fed automatically. See “Attaching the Pocket (only for the ASF model)” on page 6 for instructions on attaching the pocket, and then insert the checks.
  • Page 18: Inserting Cards

    English Inserting Cards Wait until the ID LED starts flashing. Insert the card straight with its read side facing the ink cartridge cover, with the bottom of the card continuously touching the card slot until it stops as shown in the picture below. ➀...
  • Page 19 English Validation Printing Notes on Validation Printing ❏ Do not use paper smaller than 152 × 68 mm {5.98 × 2.68 in} (W × H). ❏ Do not use paper larger than 230 × 100 mm {9.06 × 3.94 in} (W × H). ❏...
  • Page 20 Dirt on the MICR unit may cause frequent magnetic character reading errors. Clean the MICR unit every 6 months or every 100,000 passes. Use KIC Products "Waffletechnology cleaning card (Part No. KW2663- CS2B15WS EPSON TM-J9100 WAFFLE WS CLEANING CARDS 15/ BOX)." Note: Do not use sticky cleaning sheets.
  • Page 21 English Cleaning the Image Scanner If the glass of the scanner gets soiled from ink or paper dust, the quality of the image data may deteriorate. Clean the glass every 6 months or every 100,000 passes. Follow these steps to clean the glass. Put your fingers on the pocket on the right side of the printer, unlock the scanner cover, and remove it upward.
  • Page 22 English Lightly wipe the glass shown in the picture with a soft, dry cloth. CAUTION: When cleaning, never apply any liquid directly to the glass of the scanner. Do not use synthetic detergent, benzine, water, or other liquid for cleaning. Doing so may result in a stain.
  • Page 23 Clean the TOF sensor every 6 months or every 100,000 passes by following these steps. Use KIC Products "Waffletechnology cleaning card (Part No. KW2663- CS2B15WS EPSON TM-J9100 WAFFLE WS CLEANING CARDS 15/ BOX)." Note: Do not use sticky cleaning sheets. They may cause a paper jam or machine failure.
  • Page 24: Troubleshooting

    English Slide the cleaning sheet down, and insert the edge into the TOF sensor while moving the sheet back and forth. ➀ ➁ TOF sensor Clean the inside of the TOF sensor by moving the sheet back and forth 4 or 5 times between the edge of the TOF sensor and the point where the cleaning sheet stops.
  • Page 25: Paper Jams

    English Paper Jams Follow these steps to remove the jammed paper or card. Feeder Section and Card Section Put your fingers on the pocket on the right of the printer, unlock the scanner cover, and remove it upward. ➁ ➀ Put your fingers on the tab marked “Pull Open,”...
  • Page 26 Download the driver from the following web site to control the universal serial bus (USB). The technical reference guide describing related information on TM-J9000/J9100 development can also be downloaded from this web site. Customers in North America http://pos.epson.com/ Customers in the Other Areas http://www.epson-pos.com/ 24 TM-J9000/J9100 User’s Manual...
  • Page 27 English TM-J9000/J9100 Specifications TM-J9000 TM-J9100 Print method Serial ink-jet dot matrix, Serial ink-jet dot 64 nozzles × 1 line matrix, 64 nozzles × 2 lines 180 × 180 dpi Print density Font A/Font B: 12 × 24/9 × 17 Print font Font (Can be changed to 11 ×...
  • Page 28 1,600,000,000 shots/nozzle (shots are defined as the number of pulses energized for the print head) Consumables Ink cartridge: 20,000,000 characters (using font B with EPSON standard print pattern in economy mode) Temperature Printing 10 ~ 35°C {50 to 95°F} Operating 10 ~ 40°C {50 to 104°F}...
  • Page 29 English Image Scanner Specifications Image Scanner type CIS (Contact Image Sensor) scanning 203 × 203 dpi Resolution specifications Scanning mode 256-level gray scale Data transmission format Check (W × L): 100* × max. 230 mm (*100 mm fixed) Scanning area {3.94* ×...
  • Page 30: Weee (Waste Electrical And Electronic Equipment) Directive

    WEEE (Waste Electrical and Electronic Equipment) Directive This information only applies to customers in the European Union, according to Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 27 January 2003 on waste electrical and electronic equipment (WEEE) and legislation transposing and implementing it into the various national legal systems.
  • Page 31 Česky Lietuviškai Štítek s přeškrtnutým odpadkovým košem na kolečkách, Užbraukta ratuota šiukšliadėžės etiketė, kurią rasite ant který lze nalézt na výrobku, označuje, že tento product se jūsų produkto, reiškia, kad šis produktas neturėtų būti nemá likvidovat s běžným domovním odpadem. V zájmu išmestas kartu su įprastinėmis buitinėmis šiukšlėmis.
  • Page 32 Printed in China...

This manual is also suitable for:

Tm-j9100Tm-j9000

Table of Contents