Epson C31C522111 User Manual page 22

Table of Contents

English

Lightly wipe the glass shown in the

picture with a soft, dry cloth.

CAUTION:

When cleaning, never apply any liquid

directly to the glass of the scanner.

Do not use synthetic detergent, benzine,

water, or other liquid for cleaning. Doing so

may result in a stain.

When unintended black lines appear in

scanned image, the glass of the scanner

may be smeared with oil, grease, or other unremovable substance. In

such case, wipe the glass with a cloth lightly dipped in alcohol, and

after that, wipe off all remaining alcohol.

Be careful not to spill liquid into the scanner mechanism or electronic

components. This could permanently damage the mechanism and

circuitry.

Press the section marked "Close" indicated by the circle in the picture

below; then push in the scanner unit until it clicks in place.

Note:

If the scanner unit is not pushed in properly, a cover open error occurs, and

the ERROR LED comes on.

To attach the scanner cover, push it down into the connecting part

firmly until it clicks in place.

20 TM-J9000/J9100 User's Manual

Table of Contents

Tm-j9100 Tm-j9000