Zooming; Making Fine Adjustments To The Selected Region; Scrub & Shuttle - Yamaha 02R96 Owner's Manual
Digital mixing console version 2.0
Hide thumbs
Also See for 02R96:
- Owner's manual (315 pages) ,
- Supplementary manual (8 pages) ,
- Installation manual (28 pages)
Table of Contents
Advertisement
Zooming
The cursor buttons can be used to zoom the Edit window as follows.
Use the [INC] (CURSOR MODE) button to select Zoom cursor mode.
1
The CURSOR MODE section of the display shows "ZOOM."
In Zoom cursor mode, the cursor buttons work as follows:
•
Left cursor button: Zoom out horizontally.
•
Right cursor button: Zoom in horizontally.
•
Up cursor button: Zoom in vertically.
•
Down cursor button: Zoom out vertically.
Making Fine Adjustments to the Selected Region
The cursor buttons can be used in conjunction with the Parameter wheel to make fine
adjustments to the selected region.
Use the [INC] (CURSOR MODE) button to select Select cursor mode.
1
The CURSOR MODE section of the display shows "SELECT."
While holding down the left cursor button, turn the Parameter wheel to
2
make fine adjustments to the in point of the selected region.
While holding down the right cursor button, turn the Parameter wheel to
3
make fine adjustments to the out point of the selected region.
4
To select the track above, press the Up cursor button.
To select the track below, press the Down cursor button.
5
To move the cursor to the in point of the selected region, double-click the
6
Left cursor button.
7
To move the cursor to the out point of the selected region, double-click the
Right cursor button.
Scrub & Shuttle
The Parameter wheel can be used to scrub and shuttle as follows.
1
Make sure that Pro Tools is stopped.
Press the [SCRUB] button if you want to scrub, press the [SHUTTLE] button
2
if you want to shuttle.
The corresponding button indicator lights up. The [REW] and [FF] button indicators also
light up, and the cursor mode is set to Navigation (the CURSOR MODE section of the dis-
play shows "NAVIGATION").
Turn the Parameter wheel clockwise to scrub/shuttle forwards. Turn it coun-
3
terclockwise to scrub/shuttle backwards.
Scrub/shuttle starts at the in point of the selected region. If no region is selected, the edit
cursor position is used. Note that if the Edit Insertion Follows Scrub/Shuttle preference is
turned on in Pro Tools (Setups menu, Preferences command, Operation page), the cur-
rently selected region will be cancelled when the [SCRUB] or [SHUTTLE] button is
pressed.
Press the left cursor button to move to the in point. Press the right cursor button, to move
to the out point.
You can toggle between scrub and shuttle by pressing the [SCRUB] and [SHUTTLE] but-
tons, in which case scrub or shuttle continues from the current position.
215
Zooming
02R96 Version 2—Owner's Manual
- Quick Links:
- Rear Panel
Hide quick links:
Advertisement
Table of Contents
