Output Channel Mute Master; Viewing Channel Parameter Settings - Yamaha 02R96 Owner's Manual
Digital mixing console version 2.0
Hide thumbs
Also See for 02R96:
- Owner's manual (315 pages) ,
- Supplementary manual (8 pages) ,
- Installation manual (28 pages)
Table of Contents
Advertisement
Output Channel Mute Master
The 02R96 features a Mute Group Master function that enables you to mute all channels in
the Mute group using the MASTER button, much like a Mute group on an analog mixing
console. When this function is enabled, the channel [ON] buttons do not control the chan-
nels in the group collectively.
1
Follow Steps 1–4 described in the "Grouping Output Channel Mutes
(ON/OFF)" section on the previous page, select the Output Mute Master
check box, then press the [ENTER] button to check or uncheck the Output
Mute Master check box.
2
When the Output Mute Master check box is checked, the MASTER MUTE but-
ton in each group mutes or unmutes the channels in the corresponding group.
If the channels are muted by the Mute Master function, the corresponding channel [ON]
button indicators flash. You can assign the MASTER MUTE button function to one of the
USER DEFINED KEYS for convenient operation.
Viewing Channel Parameter Settings
The parameter setting of the currently selected Input Channel, Bus Out, Aux Send, or the
Stereo Out can be viewed and set on the Parameter View pages.
Use the DISPLAY ACCESS [VIEW] button to select the Parameter View page.
1
Use the LAYER buttons to select Layers, and use the [SEL] buttons to select
2
channels.
Use the cursor buttons to select the parameters, and use the Parameter
3
wheel, INC/DEC buttons, and [ENTER] buttons to set them.
Input Channels
This is the Parameter View page for the Input Channels.
GATE: The following Gate parameters for the currently selected Input Channel can be set:
Gate On/Off, Threshold, Range, Attack, Decay, and Hold. The GR meter indicates the
amount of gain reduction being applied by the Gate. Also displayed are the gate curve and
gate type. See "Gating Input Channels" on page 74 for more information.
COMP: The following Compressor parameters for the currently selected channel can be
set: Comp On/Off, Threshold, Ratio, Attack, Release, Gain, and Knee. The GR meter indi-
cates the amount of gain reduction being applied by the Compressor. Also displayed are the
comp curve and comp type. See "Compressing Channels" on page 116 for more informa-
tion.
INSERT: The currently selected channel's Insert can be turned on and off and patched. See
"Using Inserts" on page 115 for more information.
Output Channel Mute Master
02R96 Version 2—Owner's Manual
129
- Quick Links:
- Rear Panel
Hide quick links:
Advertisement
Table of Contents
