Table of Contents
Advertisement
Inverse
Assembly
Operation
The HP 10343B inverse assemblers are designed to decode commands,
messages, phases, and status conditions for 8-Bit Single-Ended and
Differential SCSI Bus systems. Rolling the screen up will inverse
assemble the lines as they appear on the bottom of the screen. If you jump
to another area of the screen by entering a new line number, simply roll
the screen up to inverse assemble that block of memory.
Note
Each time you inverse assemble a block of memory, the analyzer
will keep that block in the inverse assembled condition. You can
inverse assemble several different blocks in the analyzer memory,
but the activity between those blocks will not be inverse
assembled.
Also, blocks may not be correctly inverse assembled if you roll
the screen down, scrolling information from the top of the screen
to the bottom. To correctly inverse assemble these blocks, simply
move the first line of interest off the bottom of the screen and roll
the screen up.
Each line of the inverse assembler listing is identified by type: Command,
Status, etc. Figure 3-1 shows an example of an HP 10343B inverse
assembly listing.
HP 10343B Inverse Assemblers
3-16
Advertisement
Table of Contents
