Table of Contents
Advertisement
Loading an
Inverse
Assembler
To load an inverse assembler into the logic analyzer:
1. Connect the HP 9121D/S or HP 9122D/S 3.5 inch flexible disc drive to
the logic analyzer.
2. Install the flexible disc labeled "HP 10343B Inverse Assemblers for use
with HP 1630A/D/G and HP 1631A/D" in the HP 9121D/S or HP
9122D/S disc drive.
3. Select the SYSTEM menu of the logic analyzer and press the NEXT[ ]
or PREV[ ] key until the [Storage Operations] menu is displayed.
4. Press INSERT to list the files on the disc.
5. Press the ROLL keys until the cursor ( > ) is next to the inverse
assembler file that you want to load.
6. Select the Operation field with the CURSOR keys and press the
NEXT[ ] or PREV[ ] key until the [Load] operation is displayed.
7. Press INSERT to load the file into the HP 1630A/D/G or HP 1631A/D
Logic Analyzer.
Refer to chapter 3 for more information on the inverse assemblers.
SCSI Bus Preprocessing
2-18
Advertisement
Table of Contents
