3.1 Name and Function of Each Part
Analog input connector
3. FUNCTIONS
Terminal block (AUX OUT)
Terminal block (START IN)
123
HLG HLG
ANALOG
CH selector switch
Fig. 3-1 Front View
• Analog input
connector
• Terminal blocks
(START IN)
(START OUT)
(BUSY OUT)
(AUX OUT)
• CH selector switch : Set to "1" or "2" according to which
• LED
3 - 1
Terminal block (START OUT)
Terminal block (BUSY OUT)
HLG
CH
LED
: For acquisition of analog signals from
the exterior.
: Used for input/output of contact signals
(H: high, L: low, G: ground).
: For input of start signal to e-Line from
the exterior.
: For output of e-Line start signal.
: For output of busy signal from e-Line.
: For acquisition of fraction marker signal
from L-5200 fraction collector.
channel will use AID.
: Blinks at 1-second cycles during normal
operation (or at 100-ms cycles at
occurrence of an error).
3.1