2.2 Combination with Primaide 1000 Series
In order to perform data acquisition using AID for Primaide, at
least two Primaide 1000 series units for mounting AID and a
USB interface board are required.
An example of connection of AID and an HPLC system is shown
below.
(1)
With Two or More Primaide Modules
When combining with a system having two or more
Primaide 1000 series units plus a detector of other than the
Primaide 1000 series, install a USB interface board (IFB) in
one of the units and AID in the other unit.
IFB
5 V
e-Line connector
e-Line connector
AID
OUT
5 V
e-Line connector
Fig. 2-2 With Two or More Primaide Modules
2 - 3
(ChromAssist Data Station/
Primaide System Manager)
PM1210
SIGNAL
START IN
START
BUSY
PM1110
2.2
: e-Line
PC
Detector of other than
Primaide series